|
|
|
|
|
|
|
|
Specifications
|
|
|
|
|
|
|
|
Click on any logo link above to go directly to that product page.
The BERRINGER® is a very powerful wet vac type of unit with technology and features that also enable it to pump dry products efficiently. Like the KING VAC®, the pump system operates at extremely low noise levels and is designed to reduce vapor levels.
Pressurizing the payload for discharge to a remote container is done with the push of a button. High CFM used in the pressure mode helps to convey dry product directly from the debris tank.
The transport of products is profitable with the BERRINGER® due to the system design and lighter gross equipment weight. ASME and DOT options are available and when added allow the transportation of hazardous waste. Operator controls on the BERRINGER® are located at the rear of the unit and consists of single push buttons for starting the pump, activating one of two preset engine speeds, raising and lowering the tank for dumping, opening and closing the full opening rear door, setting the vacuum or pressure mode, venting the tank and securing power to the control panel.
Available tank sizes for the BERRINGER®; range in size from 2,000 to 4,200 gallons. The complete vacuum system can be mounted to a single axle, tandem axle or tri-axle chassis. As with the KING VAC® and DOMINATOR®, the BERRINGER®; can be mounted to the customer supplied chassis, or to a new chassis from our inventory.
| Standard Features | Available Options |
| Hydraulic Tank Lift | ASME Certification |
| Full Opening Rear Door with Hydraulic Door Opener | DOT412 for hazardous waste |
| Hydraulic Pump Drive | 20" Top Manway with Access Ladder and Platform |
| Full function Push Button Control | High Pressure Jetting Systems |
| Primary Shut-off system with Stainless Steel Float Ball | Top Mounted Hydraulic Boom |
| Centrifugal Secondary Shut-off system | Hydraulic Tank Vibrator |
| Full Length Non-dumping Hose Trays | Rear Hose Hooks |
| Internal Bolted Baffle(s) | Rear Work Lights |
| Enclosed Cabinets with Stainless Steel Hinges and Latches | Two-tone Paint and Tank Stripes |
Please contact us for our complete list of standard features and available options.
Phone: 800/334-8237 | Fax: 228/832-2068
PO Box 3368 | Gulfport, MS | 39505
E-mail: info@keithhuber.com
Copyright © 1999 Keith Huber, Inc.
